Cisco MCS 7800 Series Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Sistem Konferensi Cisco MCS 7800 Series. Cisco MCS 7800 Series 4 halaman. Multiplatform phones
Juga untuk Cisco MCS 7800 Series: Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna Akhir (6 halaman), Panduan Memulai Cepat (2 halaman), Referensi Cepat (2 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Memulai Cepat (2 halaman), Manual (43 halaman), Memulai (6 halaman), Panduan Instalasi (39 halaman), Manual (20 halaman), Panduan Memulai Cepat (2 halaman)

Adjust the Handset Rest

Step 3

(Optional) Adjust the footstand on the key expansion module and ensure that the phone and key expansion

module are stable.

Step 4

(Optional) Press Self-view to check the camera angle.

Adjust the Handset Rest

If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the

handset rest to ensure that the receiver does not slip out of the cradle.

Figure 1: Adjust the Handset Rest

Procedure

Step 1

Remove the handset from the cradle and pull the plastic tab from the handset rest.

Step 2

Rotate the tab 180 degrees.

Step 3

Hold the tab between two fingers, with the corner notches facing you.

Step 4

Line up the tab with the slot in the cradle and press the tab evenly into the slot. An extension protrudes from

the top of the rotated tab.

Step 5

Return the handset to the handset rest.

Secure the Phone with a Cable Lock (8800 Series)

You can secure your Cisco IP Phone 8800 Series with a laptop cable lock up to 20 mm wide.

Adjust Your Phone on Your Desk