Cisco MX Series Panduan Memulai - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Sistem Konferensi Cisco MX Series. Cisco MX Series 33 halaman. Telepresence video systems
Juga untuk Cisco MX Series: Panduan Memulai (41 halaman), Panduan Memulai (34 halaman), Panduan Memulai (42 halaman), Panduan Memulai (46 halaman)

Halaman Cetak

Cisco TelePresence Video Systems



Introduction

Web interface

You have to use the Touch controller or the remote control for

the configurations, until you know your system's IP address.

The configurations described in this chapter can also be found

on the Touch controller under Administrator settings. You must

enter the administrator passphrase to access that page.

Find the IP address

If you have a Touch controller, tap the gearwheel in the upper

left corner and tap Settings. You can find the IPv4 address and/

or IPv6 address in the

System Information

If you have a TRC6 remote control, navigate to the upper left

corner on the home screen and further to

1. Open a web browser and enter the system's IP address in

the address bar.

2. Enter your user name and passphrase and click

The default user name is

admin

with no passphrase set.

If you are not able to connect to the system:

• Make sure the system and computer are connected to the

same network.

• Make sure the system is switched on.

If the system has just been switched on, wait a few minutes to

allow the system to start up.

D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.

User interfaces

Web interface

section.

System

Information.

Sign

In.

On-screen setup assistant

Getting Started Guide

Touch

Appendices