Cisco MX Series 시작하기 매뉴얼 - 페이지 13

{카테고리_이름} Cisco MX Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MX Series 33 페이지. Telepresence video systems
Cisco MX Series에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (41 페이지), 시작하기 매뉴얼 (34 페이지), 시작하기 매뉴얼 (42 페이지), 시작하기 매뉴얼 (46 페이지)

페이지 인쇄

Cisco TelePresence Video Systems



Introduction

Web interface

You have to use the Touch controller or the remote control for

the configurations, until you know your system's IP address.

The configurations described in this chapter can also be found

on the Touch controller under Administrator settings. You must

enter the administrator passphrase to access that page.

Find the IP address

If you have a Touch controller, tap the gearwheel in the upper

left corner and tap Settings. You can find the IPv4 address and/

or IPv6 address in the

System Information

If you have a TRC6 remote control, navigate to the upper left

corner on the home screen and further to

1. Open a web browser and enter the system's IP address in

the address bar.

2. Enter your user name and passphrase and click

The default user name is

admin

with no passphrase set.

If you are not able to connect to the system:

• Make sure the system and computer are connected to the

same network.

• Make sure the system is switched on.

If the system has just been switched on, wait a few minutes to

allow the system to start up.

D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016.

User interfaces

Web interface

section.

System

Information.

Sign

In.

On-screen setup assistant

Getting Started Guide

Touch

Appendices