Epson L200 Panduan Servis - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Servis untuk Semua dalam Satu Printer Epson L200. Epson L200 47 halaman. Color inkjet printer
Juga untuk Epson L200: Spesifikasi (4 halaman), Panduan Pengguna (4 halaman), Petunjuk (4 halaman), Mulai di sini (2 halaman), Panduan Pengguna (2 halaman), Pemberitahuan dan Garansi (12 halaman)

Halaman Cetak

L200/L201/L100/L101

Power Supply Unit

Hole

Power Supply Unit

Power Supply Unit Cable

Power Supply Unit

Route the Power Supply Unit cable through the hole of the Frame

Base.

Left Side

Main Frame

Lower part of 80-column side

Grounding Spring

TBD

Main

Frame

Hole

Bracket

Hook

When installing the Grounding Spring of the lower part of the 80-digit side, follow the instruction below.

1. Insert the tip of the spring to the hole of the Frame Base.

2. Attach the eye of the spring to the Bracket and secure the other eye to the hook on the Main Frame.

When installing the Extension Spring of the lower part of the 0-digit side, attach the tip of the Extension Spring to the hole of the Frame Base

first. Then attach the leg of the spring to the cutout of the Main Frame from the left side as seen from the rear of the printer.

Tighten the screws in the order indicated in the figure above.

Disassembly/Assembly

FFC Cover

Groove

FFC Cover

Head FFC

Insert the folded part of the Head FFC into the groove of the FFC

Cover.

Main Frame

Right Side

Lower part of 0-column side

Extension Spring

Cutout

Hole

C.B.P-TITE SCREW 3x8 (5.0 ± 0.5 kgf·cm)

C.B.S-TITE SCREW 3x5 (7.5 ± 0.5 kgf·cm)

Details of Disassembling/Reassembling by Parts/Unit

Step 1

Head FFC

Cleaner Case Spring

Frame Base

Dowel for temporarily secure

Step 3

Cleaner Case Spring

When installing the Cap Unit, follow the instruction below.

1. Temporarily secure the Cleaner Case Spring to the hook and dowel of the Frame Base.

2. Insert the Waste Ink Tube to the Cap Unit until point A

3. Install the Cap Unit to the Frame Base, and attach the Cleaner Case Spring which is secured temporary earlier to the hook on the Cap Unit.

4. Insert one leg of the Cleaner Lever Spring to the hole of the Frame Base, and secure it to the dowel of the Frame Base, then secure the other leg

to the protrusion of the Lever Cleaner.

CR Scale

Main Frame

Extension Spring

When installing the CR Scale, confirm that the arrows on both

the edges of the CR Scale face upward.

When installing the Extension Spring, be sure to attach it with

its leg facing the rear of the printer.

Cap Unit

Step 2

Cap Unit

Waste Ink Tube

Hook

Step 4

Cap Unit

Lever Cleaner

Protrusion

Hook

Dowel

Hole

(p 26)

is hidden.

CR Scale

Revision A

Point A

Cleaner Lever Spring

Confidential