Cisco Profile Series Panduan Konfigurasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Sistem Konferensi Cisco Profile Series. Cisco Profile Series 13 halaman. Jbod on the 12g sas modular raid controller
Juga untuk Cisco Profile Series: Panduan Memulai (41 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (7 halaman), Panduan Memulai (35 halaman), Panduan Referensi Cepat (2 halaman), Panduan Instalasi (44 halaman), Lembar Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Memulai Cepat (4 halaman), Panduan Memulai Cepat (4 halaman), Panduan Instalasi (16 halaman), Panduan Memulai (32 halaman), Manual (16 halaman), Panduan Memulai (42 halaman), Panduan Memulai (46 halaman)

Halaman Cetak

Configuration Examples

Router(config)# hostname R2

R2(config)# username R1 password cisco

R2(config)# interface serial 0/0/0

R2(config-if)# encapsulation ppp

R2(config-if)# ppp authentication PAP

R2(config-if)# ppp pap sent-username R2 password cisco

R2(config-if)# end

Example: Frame Relay Configuration

This example shows how to configure frame relay encapsulation on a serial interface.

Router1>enable

Router1#configure terminal

Router1(config)# interface Serial 0/0/0

Router1(config-if)# ip address 50.50.50.1 255.255.255.0

Router1(config-if)# encapsulation frame-relay

Router1(config-if)# no keepalive

Router1(config-if)# frame-relay interface-dlci 50

Router1(config-if)# end

Router2>enable

Router2#configure terminal

Router2(config)# interface Serial 0/2/0

Router2(config-if)# ip address 50.50.50.2 255.255.255.0

Router2(config-if)# encapsulation frame-relay

Router2(config-if)# no keepalive

Router2(config-if)# clock rate 2000000

Router2(config-if)# frame-relay interface-dlci 50

Router2(config-if)# end

Example: MLPPP Configuration

This example shows how to configure Multilink PPP on a serial interface.

Router1> enable

Router1# configure terminal

Router1(config)# interface Multilink 1

Router1(config-if)# ip address

Router1(config-if)# no ip route-cache

Router1(config-if)# ppp multilink

Router1(config-if)# ppp multilink group 1

Router1(config-if)# end

Router1(config)# interface Serial 0/2/0

Router1(config-if)# no ip address

Router1(config-if)# encapsulation ppp

Router1(config-if)# no ip route-cache

Router1(config-if)# ppp multilink

Router1(config-if)# ppp multilink group 1

Router1(config-if)# end

Router1(config)# interface Serial 0/2/1

Router1(config-if)# no ip address

Router1(config-if)# encapsulation ppp

Router1(config-if)# no ip route-cache

Router1(config-if)# ppp multilink

Router1(config-if)# ppp multilink group 1

Router1(config-if)# end

Cisco 800M Series Integrated Services Routers Software Configuration Guide

120.120.120.1 255.255.255.0

Chapter 4

Configuring the Serial Interface