Cisco TelePresence MX700 Panduan Instalasi - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco TelePresence MX700. Cisco TelePresence MX700 29 halaman. Single camera on a free standing floor stand or a floor stand secured to the wall
Juga untuk Cisco TelePresence MX700: Panduan Instalasi (32 halaman), Panduan Memulai Cepat (12 halaman), Panduan Instalasi (28 halaman), Panduan Instalasi (32 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Instalasi (29 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco TelePresence MX700 Panduan Instalasi
Installation guide for Cisco TelePresence MX700 Dual camera - Floor stand
19

Start up the system

•
Remove the protection foil from the displays.
•
Make sure the cameras can move freely.
•
Insert the network and power cables into the wall outlets.
•
Switch on the system.
The power switch is located directly below the codec, next to
the power connector.
Wait a few minutes while the system starts up. The start-up may
include automatic software upgrade and restart of Touch 10 and
cameras.
•
Follow the instructions on the Touch controller.
Cisco Spark: To find more information on how to get started with
Spark registered systems, visit
look for Getting Started articles for room systems.
Other services: For further information on set-up and
configuration, download the Getting Started Guide from the
Cisco web site,
78-100277-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
http://help.ciscospark.com
http://www.cisco.com/go/mx-docs
and
Page 26