Cisco TelePresence MX700 Installatiehandleiding - Pagina 26

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cisco TelePresence MX700. Cisco TelePresence MX700 29 pagina's. Single camera on a free standing floor stand or a floor stand secured to the wall
Ook voor Cisco TelePresence MX700: Installatiehandleiding (32 pagina's), Snelstarthandleiding (12 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (32 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Installatiehandleiding (29 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Installation guide for Cisco TelePresence MX700 Dual camera - Floor stand

Start up the system

•

Remove the protection foil from the displays.

•

Make sure the cameras can move freely.

•

Insert the network and power cables into the wall outlets.

•

Switch on the system.

The power switch is located directly below the codec, next to

the power connector.

Wait a few minutes while the system starts up. The start-up may

include automatic software upgrade and restart of Touch 10 and

cameras.

•

Follow the instructions on the Touch controller.

Cisco Spark: To find more information on how to get started with

Spark registered systems, visit

look for Getting Started articles for room systems.

Other services: For further information on set-up and

configuration, download the Getting Started Guide from the

Cisco web site,

http://help.ciscospark.com

http://www.cisco.com/go/mx-docs

and

Page 26