Cisco Telepresence MX800 Manual Penggantian - Halaman 14

Jelajahi secara online atau unduh pdf Manual Penggantian untuk Sistem Konferensi Cisco Telepresence MX800. Cisco Telepresence MX800 46 halaman. Wall-mounted mx800 single
Juga untuk Cisco Telepresence MX800: Panduan Memulai Cepat (12 halaman), Panduan Instalasi (16 halaman), Manual Penggantian (47 halaman), Panduan Instalasi (30 halaman), Suku Cadang (24 halaman), Panduan Instalasi (16 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco Telepresence MX800 Manual Penggantian
Cisco TelePresence MX800 Single
Contents
Replace the single camera module
Step 2: Remove loudspeakers from positions 3, 4 and 5
The illustrations show the loudspeaker in position 3.
Repeat the steps for the loudspeakers in positions 4 and 5.
When reconnecting the loudspeakers, make sure to
connect the correct cable. The cables are marked with the
loudspeaker's position (see illustration).
Remove screw.
2a
PT4x10, Torx T20
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
Introduction
Grilles and covers
(page 2 of 6)
Pull loudspeaker 10-15 cm (4-6 inch) out.
2b
Speakers and cameras
Speakers and cameras
Loudspeaker
positions
3
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
14
Replacement Guide
Codec and monitor
Appendix
4
5
Unplug the cable from the connector
2c
on the back of the loudspeaker.