Cisco Telepresence MX800 Manual Penggantian - Halaman 12

Jelajahi secara online atau unduh pdf Manual Penggantian untuk Sistem Konferensi Cisco Telepresence MX800. Cisco Telepresence MX800 46 halaman. Wall-mounted mx800 single
Juga untuk Cisco Telepresence MX800: Panduan Memulai Cepat (12 halaman), Panduan Instalasi (16 halaman), Manual Penggantian (47 halaman), Panduan Instalasi (30 halaman), Suku Cadang (24 halaman), Panduan Instalasi (16 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (46 halaman)

Cisco TelePresence MX800 Single

Contents

Replace a loudspeaker

Step 2: Remove loudspeaker

The same procedure applies for

loudspeakers in all positions.

When reconnecting the loudspeakers,

make sure to connect the correct cable.

Remove screw.

PT4x10, Torx T20

Re-assembly:

In order to install the new loudspeaker, follow all the steps in reversed order.

D15298.01 MX800 Single Replacement Guide, MARCH 2015.

Introduction

Grilles and covers

(page 2 of 2)

Speakers and cameras

Pull loudspeaker 10-15 cm (4-6 inch) out.

Replacement Guide

Codec and monitor

Unplug the cable from the connector on

the back of the loudspeaker.

Appendix