Cisco Telepresence MX800 Replacement Manual - Page 12

Browse online or download pdf Replacement Manual for Conference System Cisco Telepresence MX800. Cisco Telepresence MX800 46 pages. Wall-mounted mx800 single
Also for Cisco Telepresence MX800: Quick Start Manual (12 pages), Installation Manual (16 pages), Replacement Manual (47 pages), Installation Manual (30 pages), Spare Parts (24 pages), Installation Manual (16 pages), Quick Reference Manual (2 pages), Manual (45 pages), Manual (45 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Getting Started Manual (46 pages)

Print Page
Cisco Telepresence MX800 Replacement Manual
Cisco TelePresence MX800 Single
Contents
Replace a loudspeaker

Step 2: Remove loudspeaker

The same procedure applies for
loudspeakers in all positions.
When reconnecting the loudspeakers,
make sure to connect the correct cable.
Remove screw.
2a
PT4x10, Torx T20
Re-assembly:
In order to install the new loudspeaker, follow all the steps in reversed order.
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
Introduction
Grilles and covers
(page 2 of 2)
2b
Speakers and cameras
Speakers and cameras
Pull loudspeaker 10-15 cm (4-6 inch) out.
12
Replacement Guide
Codec and monitor
Unplug the cable from the connector on
2c
the back of the loudspeaker.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
Appendix