Cisco Telepresence MX800 Vervangingshandleiding - Pagina 12

Blader online of download pdf Vervangingshandleiding voor {categorie_naam} Cisco Telepresence MX800. Cisco Telepresence MX800 46 pagina's. Wall-mounted mx800 single
Ook voor Cisco Telepresence MX800: Snelstarthandleiding (12 pagina's), Installatiehandleiding (16 pagina's), Vervangingshandleiding (47 pagina's), Installatiehandleiding (30 pagina's), Onderdelen (24 pagina's), Installatiehandleiding (16 pagina's), Snelle referentiehandleiding (2 pagina's), Handmatig (45 pagina's), Handmatig (45 pagina's), Snelle referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Aan de slag handleiding (46 pagina's)

Cisco TelePresence MX800 Single

Contents

Replace a loudspeaker

Step 2: Remove loudspeaker

The same procedure applies for

loudspeakers in all positions.

When reconnecting the loudspeakers,

make sure to connect the correct cable.

Remove screw.

PT4x10, Torx T20

Re-assembly:

In order to install the new loudspeaker, follow all the steps in reversed order.

D15298.01 MX800 Single Replacement Guide, MARCH 2015.

Introduction

Grilles and covers

(page 2 of 2)

Speakers and cameras

Pull loudspeaker 10-15 cm (4-6 inch) out.

Replacement Guide

Codec and monitor

Unplug the cable from the connector on

the back of the loudspeaker.

Appendix