Cisco TelePresence SX10 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco TelePresence SX10. Cisco TelePresence SX10 38 halaman. In-room control on touch 10
Juga untuk Cisco TelePresence SX10: Panduan Instalasi (8 halaman), Panduan Pengguna (26 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (29 halaman), Panduan Pengguna Awal (9 halaman), Panduan Pengguna (38 halaman), Panduan Instalasi (8 halaman), Panduan Pengguna (2 halaman), Panduan Pengguna (37 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (5 halaman), Panduan Pengguna (38 halaman), Panduan Memulai (46 halaman), Panduan Cepat (2 halaman)

Video Calls

Add Additional Participants to an Existing Call

In a call, navigate to Add and press OK on

the remote control. This will put the current

call on hold.

The calls are now merged together.

D15097.22 Cisco TelePresence SX10, SX20 User Guide APRIL 2020

Locate the participant to be added in the

usual way. Press OK.

Repeat the process to add more

participants, if needed.

Navigate to Add and press OK to expand

the call into a conference.

Press the red End Call button on the

remote control, or use the Cursor keys

to select End Call and then press OK to

terminate the call.

About

Video Conferences

Your network may be equipped

with the capability to initiate a video

conference with several participants.

The maximum number of

participants supported by your

video device depends on device

configuration and the video

infrastructure. If in doubt, contact

your video support team.

If you want to initiate a video

conference, you must call each

participant one by one.

If you are the one who initiated the

conference, you can end the entire

conference. The other participants

can only disconnect themselves

from the conference.