Cisco TelePresence SX10 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di conferenze Cisco TelePresence SX10. Cisco TelePresence SX10 38. In-room control on touch 10
Anche per Cisco TelePresence SX10: Manuale di installazione (8 pagine), Manuale d'uso (26 pagine), Manuale rapido (2 pagine), Manuale d'uso (34 pagine), Manuale d'uso (29 pagine), Manuale d'uso preliminare (9 pagine), Manuale d'uso (38 pagine), Manuale di installazione (8 pagine), Manuale d'uso (2 pagine), Manuale d'uso (37 pagine), Manuale (45 pagine), Manuale (45 pagine), Manuale di installazione (2 pagine), Manuale d'uso (34 pagine), Manuale d'uso (5 pagine), Manuale d'uso (38 pagine), Manuale introduttivo (46 pagine), Manuale rapido (2 pagine)

Stampa la pagina
Cisco TelePresence SX10 Manuale d'uso
Video Calls

Add Additional Participants to an Existing Call

1
In a call, navigate to Add and press OK on
the remote control. This will put the current
call on hold.
4
The calls are now merged together.
D15097.22 Cisco TelePresence SX10, SX20 User Guide APRIL 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Locate the participant to be added in the
usual way. Press OK.
5
Repeat the process to add more
participants, if needed.
3
Navigate to Add and press OK to expand
the call into a conference.
6
Press the red End Call button on the
remote control, or use the Cursor keys
to select End Call and then press OK to
terminate the call.
About
Video Conferences
Your network may be equipped
with the capability to initiate a video
conference with several participants.
The maximum number of
participants supported by your
video device depends on device
configuration and the video
infrastructure. If in doubt, contact
your video support team.
If you want to initiate a video
conference, you must call each
participant one by one.
If you are the one who initiated the
conference, you can end the entire
conference. The other participants
can only disconnect themselves
from the conference.
12