Cisco TelePresence SX20 Setup Manual - Halaman 2

Jelajahi secara online atau unduh pdf Setup Manual untuk Sistem Konferensi Cisco TelePresence SX20. Cisco TelePresence SX20 8 halaman. In-room control on touch 10
Juga untuk Cisco TelePresence SX20: Set Cepat (8 halaman), Panduan Memulai (41 halaman), Panduan Memulai (42 halaman), Panduan Referensi Cepat (2 halaman), Set Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (29 halaman), Panduan Pemecahan Masalah (37 halaman), Panduan Informasi Kepatuhan Peraturan dan Keselamatan (9 halaman), Panduan Pengguna (38 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (37 halaman), Manual (45 halaman), Manual (45 halaman), Lembar Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (5 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Memulai (42 halaman), Panduan Referensi (8 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco TelePresence SX20 Setup Manual
1

Connecting Equipment

1-1

Before You Begin

Before you begin the installation, make sure that you have the following equipment:
SX20 Codec
●
Power Supply and Power Cable
●
Ethernet Cable for LAN
●
Codec Wall Mounting Kit (optional)
●
Camera (Precision 40 or PrecisionHD 12x)
●
Camera Cable
●
Camera Mounting Bracket (optional)
●
Table Microphone 20 (1 default and 1 optional)
●
Microphone Extension Cable (optional)
●
TRC6 Remote Control and two AAA Batteries
●
Touch 10 Controller (optional)
●
Monitor or Projector
●
Loudspeaker (external or built-in to the monitor)
●
HDMI Cable for Monitor (1 default)
●
PC
●
VGA to DVI-A Cable for PC Connectivity (optional)
●
HDMI to DVI-D Cable for PC Connectivity (optional)
●
Make sure that all units are switched off when connecting or disconnecting devices.
1-2

Connecting Cables

Connect all cables as illustrated.
1
2
7
6
1
If connecting an external loudspeaker, please take care to use an active speaker
(built-in amplifier). Use an ungrounded (floating) speaker to avoid ground loop
noise.
2
Connect one or two microphones to your codec.
3
Connect the codec to LAN/Ethernet.
4
Connect your primary display to the blue colored HDMI socket. With the dual dis-
play option, connect the second display to the other HDMI output.
5
Connect your camera to the codec.
6
Connect a PC (video and audio) to be able to share presentations (locally, or with
remote participants).
7
Always use the provided power supply.
1
Connecting Equipment
3
4
5
Cisco TelePresence SX20 Quick Set Easy Setup Guide