Cisco TelePresence SX20 Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco TelePresence SX20. Cisco TelePresence SX20 2 halaman. In-room control on touch 10
Juga untuk Cisco TelePresence SX20: Set Cepat (8 halaman), Panduan Memulai (41 halaman), Panduan Memulai (42 halaman), Panduan Referensi Cepat (2 halaman), Set Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (29 halaman), Panduan Pemecahan Masalah (37 halaman), Panduan Informasi Kepatuhan Peraturan dan Keselamatan (9 halaman), Setup Manual (8 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (37 halaman), Manual (45 halaman), Manual (45 halaman), Lembar Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (5 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Memulai (42 halaman), Panduan Referensi (8 halaman), Panduan Memulai (46 halaman)

Installation Guide for Cisco TelePresence SX20 Quick Set

Connecting the cables

Connect all cables as illustrated.

Caution:

Make sure all units are switched off when connecting or

disconnecting devices.

If connecting an external loudspeaker, please take care to use an

active speaker (built-in amplifier). Use an ungrounded (floating)

speaker to avoid ground loop noise.

Connect one or two microphones to your codec.

We recommend Cisco Table Microphone 20 or

Cisco TelePresence Ceiling Microphone.

Connect the codec to LAN/Ethernet.

Connect your primary display to the blue colored HDMI socket.

With the dual display option, connect the second display to the

other HDMI output.

Connect your camera (option A or B) to the codec.

Connect a PC (video and audio) to be able to share presentations

(locally, or with remote participants).

Always use the provided power supply:

y FSP FSP060-DIBAN2

Starting to use the system

If the codec is not starting automatically, press the power

button to switch it on. When the button lights steadily the

system is ready for configuration. This may take a few minutes.

Follow the instructions on screen:

y Cisco Spark: To find more information on how to get started with

Spark registered systems, visit

http://help.ciscospark.com

for Getting Started articles for room systems.

y Other services: For further information on set-up and configuration,

download the Getting Started Guide from the Cisco web site,

http://www.cisco.com/go/sx-docs

and look

Mini-

HDMI

jack

(or VGA)

HDMI

Ventilation

Do not block any ventilation openings;

minimum 8 cm / 3.15 in. free space.

Camera option A:

PrecisionHD 1080p 12X

Camera option B:

Precision 40