Cisco TelePresence SX20 Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco TelePresence SX20. Cisco TelePresence SX20 37 halaman. In-room control on touch 10
Juga untuk Cisco TelePresence SX20: Set Cepat (8 halaman), Panduan Memulai (41 halaman), Panduan Memulai (42 halaman), Panduan Referensi Cepat (2 halaman), Set Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (29 halaman), Panduan Pemecahan Masalah (37 halaman), Panduan Informasi Kepatuhan Peraturan dan Keselamatan (9 halaman), Setup Manual (8 halaman), Panduan Pengguna (38 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Lembar Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Pengguna (34 halaman), Panduan Pengguna (5 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Memulai (42 halaman), Panduan Referensi (8 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco TelePresence SX20 Panduan Pengguna
Video Calls

Enable Do Not Disturb

1
Starting from Home screen, use the Cursor keys on the remote
control to select the More icon (>) in the upper left corner of
the screen.
3
Use the Cursor keys on the remote control to navigate down to
Do Not Disturb and use the OK button on the remote control to
set it to On or Off (toggling).
D1509716 User Guide
Cisco TelePresence SX10, SX20
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved.
2
Press OK on the remote control.
4
Press the OK key on the remote control to exit the menu, putting
changes into effect.

About Do Not Disturb

Your system can be set up so that it
does not respond to incoming calls.
When set to Do Not Disturb,
ringtones are muted and call
attempts made by others to reach
you will appear as missed calls. You
may, however, place calls as much
as you like.
As default, there is a 60 minutes
timeout on the Do not disturb (after
which the system will return to
normal operation), but this may have
been changed to a different setting
by your Video Support Team.
18