Cisco TelePresence Touch 10 Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco TelePresence Touch 10. Cisco TelePresence Touch 10 6 halaman. Ce 9.3, systems
Juga untuk Cisco TelePresence Touch 10: Panduan Instalasi (12 halaman), Panduan Pengguna (45 halaman), Panduan Instalasi (2 halaman)
Halaman Cetak
Remote pairing
Connect Touch 10
Connect the Touch 10 to a network socket.
Option A: When the network socket does not provide Power over Ethernet (PoE) you will
need a mid-span PoE injector to power Touch 10.
Option B: The network socket provides Power over Ethernet (PoE).
Touch 10 set-up
Once Touch 10 is connected to power, the set-up procedure begins. Follow the
instructions on screen.
When the
Select codec to pair with
dialog appears, note the following:
•
A list of codecs signalling that they are available for pairing will show up in the dialog.
Tap the name of the codec you want to pair to followed by
•
If your codec does not appear in the list of available codecs, you can pair the devices
manually. Click
Select codec
manually..., enter the IP address or host name of the
codec, and tap
Start
Pairing.
•
You have to enter the codec's administrator username and password for the pairing to
commence.
If Touch 10 needs software upgrade, new software will be downloaded from the codec
and installed on the unit automatically as part of the set-up procedure. Touch 10 restarts
after the upgrade.
You can verify that Touch 10 is successfully connected to the codec by checking that the
codec address is displayed in the top banner.
Start
Pairing.
A
B
PoE rated
Ethernet cable
Ethernet cable
PoE rated
Ethernet cable
Standard