Cisco TelePresence Touch 10 설치 매뉴얼 - 페이지 3

{카테고리_이름} Cisco TelePresence Touch 10에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence Touch 10 6 페이지. Ce 9.3, systems
Cisco TelePresence Touch 10에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 사용자 설명서 (45 페이지), 설치 매뉴얼 (2 페이지)

Cisco TelePresence Touch 10 설치 매뉴얼

Remote pairing

Connect Touch 10
Connect the Touch 10 to a network socket.
Option A: When the network socket does not provide Power over Ethernet (PoE) you will
need a mid-span PoE injector to power Touch 10.
Option B: The network socket provides Power over Ethernet (PoE).
Touch 10 set-up
Once Touch 10 is connected to power, the set-up procedure begins. Follow the
instructions on screen.
When the
Select codec to pair with
dialog appears, note the following:
A list of codecs signalling that they are available for pairing will show up in the dialog.
Tap the name of the codec you want to pair to followed by
If your codec does not appear in the list of available codecs, you can pair the devices
manually. Click
Select codec
manually..., enter the IP address or host name of the
codec, and tap
Start
Pairing.
You have to enter the codec's administrator username and password for the pairing to
commence.
If Touch 10 needs software upgrade, new software will be downloaded from the codec
and installed on the unit automatically as part of the set-up procedure. Touch 10 restarts
after the upgrade.
You can verify that Touch 10 is successfully connected to the codec by checking that the
codec address is displayed in the top banner.
Start
Pairing.
A
B
PoE rated
Ethernet cable
Ethernet cable
PoE rated
Ethernet cable
Standard