Cisco UC500 series Panduan Konfigurasi - Halaman 50

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Sistem Konferensi Cisco UC500 series. Cisco UC500 series 50 halaman. Sip trunking unified communications 500 series

Halaman Cetak

6 Test plan & verification

After configuring the above – the installer or integrator must make calls to ensure the

configuration does work fine. If this is being used for testing to a specific SP (service

provider), it is strongly recommended that a capture of the traces for various test cases be

done. These traces can be sniffer traces got from the WAN port of the UC500 (using

Wireshark software on a PC).

7 Technical Assistance

The Cisco Support website provides extensive online resources, including documentation

and tools for troubleshooting and resolving technical issues with Cisco products and

technologies. Access to most tools on the Cisco Support website requires a Cisco.com

user ID and password.

If you have a valid service contract but do not have a user ID or password, you can

http://www.cisco.com/techsupport

8 Disclaimer:

This configuration guide is offered as a convenience only, and any specifications and

information regarding the product in this guide are subject to change at any time. All

statements, information, and recommendations in this guide are believed to be accurate at

the time of publication but are presented without warranty of any kind, express or

implied, and are provided "AS IS". Users take full responsibility for the application

of the specifications and information in this guide. In no event shall Cisco or its suppliers

be liable for any indirect, special, consequential, or incidental damages, including,

without limitation, lost profits or loss or damage arising out of the use or inability to use

this guide, even if Cisco or its suppliers have been advised of the possibility of such

damage.