Sony XDCAM EX PMW-EX30 Panduan Memulai Cepat - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Camcorder Sony XDCAM EX PMW-EX30. Sony XDCAM EX PMW-EX30 8 halaman. Xdcam ex family
Juga untuk Sony XDCAM EX PMW-EX30: Brosur & Spesifikasi (18 halaman), Brosur & Spesifikasi (35 halaman), Garansi Terbatas (7 halaman), Manual (3 halaman), Brosur (24 halaman), Brosur & Spesifikasi (35 halaman)
Halaman Cetak
Status
Message
Verifying the
There is an error in the connection order
communication status
of the device.
between the computer
and PMW-EX30 (see
Please switch off the connected device,
page 4)
and repeat the upgrade from the
beginning.
Please press the power switch on the
device to power it on after connecting
the device to the PC with the USB cable.
Push the [OK] button to exit the upgrade
tool.
A communication error occurred.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
An unexpected error occurred.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Verifying the model
The connected device has already been
information (see
upgraded.
page 4)
Press [Exit] to exit the upgrade tool.
The model name does not match the
name of the connected device.
Please use the upgrade tool
corresponding to the connected device.
Push the [OK] button to exit the upgrade
tool.
Failed to acquire the power supply type.
Please switch off the connected device,
and repeat the upgrade from the
beginning.
Push the [OK] button to exit the upgrade
tool.
Location of Message
Message box
Message box
Message box
Status/message display
area
Message box
Message box
Remedy
Turn off the power of the
PMW-EX30, and re-connect
it to the computer (see
page 1).
Turn off the power of the
PMW-EX30, and re-connect
it to the computer (see
page 1).
Turn off the power of the
PMW-EX30, and repeat the
procedure from the
beginning.
There is no need to perform
an upgrade.
Reinstall the appropriate
Version Up Tool file (see
page 2).
Turn off the power of the
PMW-EX30, and repeat the
procedure from the
beginning.
7