Cisco 6160 Panduan Pemasangan Perangkat Keras - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Perangkat Keras Jaringan Cisco 6160. Cisco 6160 21 halaman. Without a pots splitter configuration
Juga untuk Cisco 6160: Panduan Referensi Cepat (38 halaman), Catatan Pemasangan Dan Penggantian (18 halaman), Manual Prosedur Instalasi (32 halaman)
Halaman Cetak
Chapter 2
Preparing for Installation
Table 2-4
Check
OL-2190-02 B0
Tool and Equipment Requirements Checklist (continued)
Tools and Equipment
Wire for the following connections:
T1 or T1 IMA trunk—Industry standard T1 twisted-pair wire (use two-pair stock only).
•
T1 or T1 IMA subtend—RJ-48 to RJ-48 industry standard T1 twisted-pair wire (use
•
two-pair stock only).
4
BITS
clock interface—24 to 26 AWG
•
Alarm contacts—24 to 26 AWG twisted-pair wire.
•
Ground the Cisco 6160 chassis—8 AWG or larger, green or green and yellow striped,
•
copper solid or stranded.
Ground the POTS splitter, as necessary—Refer to the vendor documentation for wire
•
specifications.
Cisco 6160 chassis power connections—12 AWG black and red copper solid or
•
stranded.
Coaxial cable for a DS3 connection—Type 734A, type 735A, or equivalent.
Fiber cable for OC-3c connections—SMF or MMF, as appropriate.
7Console and auxiliary cables—Unshielded RJ-45 serial cable that complies with the
EIA/TIA-232 standard and provides connection to a system console.
Ethernet connection—Cat 5 UTP
complies with Ethernet standards.
Necessary equipment for ESD protection—Required whenever you handle Cisco
equipment, which includes the chassis and modules.
Tools
No 1 3/16-inch flat-head screwdriver.
A Phillips-head screwdriver.
Wire stripper.
Wire-wrapping tool, optional.
Grounding lug crimping tool, as necessary.
Mounting screws—To mount the Cisco 6160 and POTS splitter to the rack.
Ring lugs (5/8-inch or 3/4-inch) for the grounding wire.
Note
The hole in the ring lug should be large enough for the screw to pass through.
Metric measuring tape or ruler.
Marking pen.
Tie wraps, as necessary.
5
twisted-pair wire.
6
7
or Cat 5 STP
cable with an RJ-45 connector that
Cisco 6160 Hardware Installation Guide
Required Tools and Equipment
2-17