Cisco 6160 하드웨어 설치 매뉴얼 - 페이지 17

{카테고리_이름} Cisco 6160에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6160 21 페이지. Without a pots splitter configuration
Cisco 6160에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (38 페이지), 설치 및 교체 참고 사항 (18 페이지), 설치 절차 매뉴얼 (32 페이지)

페이지 인쇄
Cisco 6160 하드웨어 설치 매뉴얼
Chapter 2
Preparing for Installation
Table 2-4
Check
OL-2190-02 B0
Tool and Equipment Requirements Checklist (continued)
Tools and Equipment
Wire for the following connections:
T1 or T1 IMA trunk—Industry standard T1 twisted-pair wire (use two-pair stock only).
•
T1 or T1 IMA subtend—RJ-48 to RJ-48 industry standard T1 twisted-pair wire (use
•
two-pair stock only).
4
BITS
clock interface—24 to 26 AWG
•
Alarm contacts—24 to 26 AWG twisted-pair wire.
•
Ground the Cisco 6160 chassis—8 AWG or larger, green or green and yellow striped,
•
copper solid or stranded.
Ground the POTS splitter, as necessary—Refer to the vendor documentation for wire
•
specifications.
Cisco 6160 chassis power connections—12 AWG black and red copper solid or
•
stranded.
Coaxial cable for a DS3 connection—Type 734A, type 735A, or equivalent.
Fiber cable for OC-3c connections—SMF or MMF, as appropriate.
7Console and auxiliary cables—Unshielded RJ-45 serial cable that complies with the
EIA/TIA-232 standard and provides connection to a system console.
Ethernet connection—Cat 5 UTP
complies with Ethernet standards.
Necessary equipment for ESD protection—Required whenever you handle Cisco
equipment, which includes the chassis and modules.
Tools
No 1 3/16-inch flat-head screwdriver.
A Phillips-head screwdriver.
Wire stripper.
Wire-wrapping tool, optional.
Grounding lug crimping tool, as necessary.
Mounting screws—To mount the Cisco 6160 and POTS splitter to the rack.
Ring lugs (5/8-inch or 3/4-inch) for the grounding wire.
Note
The hole in the ring lug should be large enough for the screw to pass through.
Metric measuring tape or ruler.
Marking pen.
Tie wraps, as necessary.
5
twisted-pair wire.
6
7
or Cat 5 STP
cable with an RJ-45 connector that
Cisco 6160 Hardware Installation Guide
Required Tools and Equipment
2-17