Cisco 6160 하드웨어 설치 매뉴얼

{카테고리_이름} Cisco 6160에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6160 21 페이지. Without a pots splitter configuration
Cisco 6160에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (38 페이지), 설치 및 교체 참고 사항 (18 페이지), 설치 절차 매뉴얼 (32 페이지)

Cisco 6160 하드웨어 설치 매뉴얼
Preparing for Installation
This chapter provides the requirements that are necessary to prepare for the installation of the
Cisco 6160 system.
This chapter contains the following sections:
Caution
Before you begin the installation procedures, read the entire chapter for important information and
safety warnings.
2.1 Safety Requirements
This section describes safety requirements for the Cisco 6160 system. Before you install the
Cisco 6160 system, ensure that all the criteria in this section are met. This section describes the
following safety requirements:
2.1.1 Safety Guidelines
Before working on the equipment, be aware of standard safety guidelines and the hazards that are
involved in working with electrical circuitry to prevent accidents. Adhere to the following cautions and
warnings and those throughout the guide for safe and hazard-free installation.
OL-2190-02 B0
Safety Requirements, page 2-1
Site Requirements, page 2-10
Required Tools and Equipment, page 2-16
Unpacking the Cisco 6160 System, page 2-18
Verifying Contents, page 2-19
Inspecting for Damage, page 2-19
Safety Guidelines, page 2-1
Maintaining Safety with Electricity, page 2-7
Preventing Electrostatic Discharge Damage, page 2-8
General Maintenance Guidelines, page 2-9
C H A P T E R
Cisco 6160 Hardware Installation Guide
2
2-1