Cisco 6160 설치 절차 매뉴얼

{카테고리_이름} Cisco 6160에 대한 설치 절차 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6160 32 페이지. Without a pots splitter configuration
Cisco 6160에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (38 페이지), 하드웨어 설치 매뉴얼 (21 페이지), 설치 및 교체 참고 사항 (18 페이지)

페이지 인쇄

Installing a Cisco 6160 Without a POTS Splitter

Configuration

This chapter provides installation procedures for installing a Cisco 6160 without a POTS splitter for

xDSL data traffic.

The installation procedures in this chapter apply to a Cisco 6160 system shipped with the individual

Note

hardware components preinstalled. For information about installing or replacing field-replaceable units

(FRUs) in the Cisco 6160 chassis, see

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Caution

Before you begin the installation procedures, read the entire chapter for important information and

safety warnings.

Note

Before installing and cabling the equipment, be aware of standard safety practices and the hazards

involved in working with electrical circuitry to prevent accidents. See the

on page 2-1

To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance

and Safety Information for the Cisco 6160 System document that accompanied this product.

See the

Note

about configuration components.

OL-2190-02 B0

for all cautions and warnings that you need to ensure a safe and hazard-free installation.

"Cisco 6160 Without a POTS Splitter Configuration" section on page 1-4

C H A P T E R

Chapter 6, "Upgrading and Maintaining the Cisco 6160 System."

Cisco 6160 Hardware Installation Guide

"Safety Requirements" section

for more information

4-1