Cisco 6160 Kurulum Prosedürleri Kılavuzu

Ağ Donanımı Cisco 6160 için çevrimiçi göz atın veya pdf Kurulum Prosedürleri Kılavuzu indirin. Cisco 6160 32 sayfaları. Without a pots splitter configuration
Ayrıca Cisco 6160 için: Hızlı Referans Kılavuzu (38 sayfalar), Donanım Kurulum Kılavuzu (21 sayfalar), Montaj ve Değiştirme Notları (18 sayfalar)

Installing a Cisco 6160 Without a POTS Splitter

Configuration

This chapter provides installation procedures for installing a Cisco 6160 without a POTS splitter for

xDSL data traffic.

The installation procedures in this chapter apply to a Cisco 6160 system shipped with the individual

Note

hardware components preinstalled. For information about installing or replacing field-replaceable units

(FRUs) in the Cisco 6160 chassis, see

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Caution

Before you begin the installation procedures, read the entire chapter for important information and

safety warnings.

Note

Before installing and cabling the equipment, be aware of standard safety practices and the hazards

involved in working with electrical circuitry to prevent accidents. See the

on page 2-1

To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance

and Safety Information for the Cisco 6160 System document that accompanied this product.

See the

Note

about configuration components.

OL-2190-02 B0

for all cautions and warnings that you need to ensure a safe and hazard-free installation.

"Cisco 6160 Without a POTS Splitter Configuration" section on page 1-4

C H A P T E R

Chapter 6, "Upgrading and Maintaining the Cisco 6160 System."

Cisco 6160 Hardware Installation Guide

"Safety Requirements" section

for more information

4-1