Cisco 6160 하드웨어 설치 매뉴얼 - 페이지 16

{카테고리_이름} Cisco 6160에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6160 21 페이지. Without a pots splitter configuration
Cisco 6160에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (38 페이지), 설치 및 교체 참고 사항 (18 페이지), 설치 절차 매뉴얼 (32 페이지)

페이지 인쇄

Required Tools and Equipment

2.3 Required Tools and Equipment

Table 2-4

Check

Cisco 6160 Hardware Installation Guide

2-16

lists the tools and equipment you need to install and connect the Cisco 6160 system.

Tool and Equipment Requirements Checklist

Tools and Equipment

Hardware Components and Cables

Cisco 6160 chassis, which will have the following components already installed:

Line cards (one or more types):

•

8xIDSL.

–

8xG.SHDSL.

–

8xDMT.

–

4xSDSL.

–

4xflexi.

One of the following NI-2 cards:

•

DS3+T1/E1 IMA.

–

DS3/2DS3.

–

OC-3c/2DS3 SMF

–

OC-3c/OC-3c SMF or MMF.

–

One of the following I/O cards:

•

DS3/2DS3+8xT1 I/O card.

–

DS3/2DS3 I/O card.

–

The I/O card should ship with an EMI cover, screws, standoff screws, and washers.

Note

•

PEM(s).

•

Blower tray.

Blank faceplates, as necessary.

•

Third-party POTS splitters can be installed in a Cisco 6160 with a POTS splitter

configuration. Please verify the compatibility with your Cisco representative.

Telco cables with Champs connectors for the following configurations:

Cisco 6160 with a POTS splitter configuration.

•

Cisco 6160 to third-party POTS splitter connections.

–

Third-party POTS splitter to MDF

–

Cisco 6160 without POTS splitter connections.

•

–

Cisco 6160 to MDF.

Note

See

Appendix B, "Cable and Port Mapping Specifications"

for the subscriber connections. Refer to the third-party POTS splitter documentation

for cable specifics.

or MMF

connections.

Chapter 2

Preparing for Installation

for a port mapping table

OL-2190-02 B0