Cisco 7513 Series Mempertahankan - Halaman 13

Jelajahi secara online atau unduh pdf Mempertahankan untuk Perangkat Keras Jaringan Cisco 7513 Series. Cisco 7513 Series 20 halaman. Chassis replacement
Juga untuk Cisco 7513 Series: Panduan Memulai Cepat (44 halaman), Manual Petunjuk Penggantian (26 halaman), Lembar data (11 halaman), Manual (30 halaman), Manual Petunjuk Penggantian (19 halaman), Manual Petunjuk Penggantian (22 halaman)

Chapter 7

Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router

Figure 7-10

Removing and Replacing the Cisco 7513, Cisco 7513-MX, and Cisco 7576

Backplane Maintenance Cover

The backplane maintenance cover provides EMI and ground protection for the chassis interior. To access

the chassis interior, you must remove the backplane cover. You need a number 2 Phillips screwdriver to

remove the cover screws.

Following is the procedure for removing and replacing the backplane maintenance cover. This procedure

assumes you have already removed the front panels. If not, see the appropriate procedures in this chapter

to remove these items.

Step 1

Attach an ESD-preventive strap between you and an unpainted chassis surface.

Step 2

Loosen the ten Phillips screws that secure the cover.

OL-5008-03 B0

Maintenance Procedures for the Cisco 7513, Cisco 7513-MX, and Cisco 7576

Replacing the Cisco 7513, Cisco 7513-MX, and Cisco 7576 Cover Panels

Cisco 7500 Series Installation and Configuration Guide

7-13