Cisco 7513 Series Maintaining - Page 13

Browse online or download pdf Maintaining for Network Hardware Cisco 7513 Series. Cisco 7513 Series 20 pages. Chassis replacement
Also for Cisco 7513 Series: Quick Start Manual (44 pages), Replacement Instructions Manual (26 pages), Datasheet (11 pages), Manual (30 pages), Replacement Instructions Manual (19 pages), Replacement Instructions Manual (22 pages)

Print Page
Cisco 7513 Series Maintaining
Chapter 7
Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router
Figure 7-10
Removing and Replacing the Cisco 7513, Cisco 7513-MX, and Cisco 7576
Backplane Maintenance Cover
The backplane maintenance cover provides EMI and ground protection for the chassis interior. To access
the chassis interior, you must remove the backplane cover. You need a number 2 Phillips screwdriver to
remove the cover screws.
Following is the procedure for removing and replacing the backplane maintenance cover. This procedure
assumes you have already removed the front panels. If not, see the appropriate procedures in this chapter
to remove these items.
Step 1
Attach an ESD-preventive strap between you and an unpainted chassis surface.
Step 2
Loosen the ten Phillips screws that secure the cover.
OL-5008-03 B0
Maintenance Procedures for the Cisco 7513, Cisco 7513-MX, and Cisco 7576
Replacing the Cisco 7513, Cisco 7513-MX, and Cisco 7576 Cover Panels
Cisco 7500 Series Installation and Configuration Guide
7-13