Cisco 7513 Series Maintaining - Page 15
Browse online or download pdf Maintaining for Network Hardware Cisco 7513 Series. Cisco 7513 Series 20 pages. Chassis replacement
Also for Cisco 7513 Series: Quick Start Manual (44 pages), Replacement Instructions Manual (26 pages), Datasheet (11 pages), Manual (30 pages), Replacement Instructions Manual (19 pages), Replacement Instructions Manual (22 pages)
Print Page
Chapter 7
Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router
Figure 7-12
Standoff
screw holes
The CI is a printed circuit board mounted to the noninterface processor side of the backplane, behind the
backplane maintenance cover. The Cisco 7513 and Cisco 7513-MX have one dual arbiter and one chassis
interface. The Cisco 7576 has two dual arbiters and two chassis interfaces. (See
back of the CI (backplane side) is a connector that plugs directly into the backplane. The edge connector
is for diagnostics at the factory and is not used.
Figure 7-13
Dual arbiter
or turbo arbiter
Chassis
interface
OL-5008-03 B0
Maintenance Procedures for the Cisco 7513, Cisco 7513-MX, and Cisco 7576
Cisco 7500 Series Chassis Interface
Chassis interface
Location of the CI with Maintenance Cover Removed (Cisco 7513 and Cisco 7513-MX
Shown)
Standoff
screw holes
Cisco 7500 Series Installation and Configuration Guide
Figure
7-13.) On the
7-15