Cisco 7513 Series Utrzymanie - Strona 15

Przeglądaj online lub pobierz pdf Utrzymanie dla Sprzęt sieciowy Cisco 7513 Series. Cisco 7513 Series 20 stron. Chassis replacement
Również dla Cisco 7513 Series: Skrócona instrukcja obsługi (44 strony), Instrukcja wymiany (26 strony), Arkusz danych (11 strony), Podręcznik (30 strony), Instrukcja wymiany (19 strony), Instrukcja wymiany (22 strony)

Chapter 7

Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router

Figure 7-12

Standoff

screw holes

The CI is a printed circuit board mounted to the noninterface processor side of the backplane, behind the

backplane maintenance cover. The Cisco 7513 and Cisco 7513-MX have one dual arbiter and one chassis

interface. The Cisco 7576 has two dual arbiters and two chassis interfaces. (See

back of the CI (backplane side) is a connector that plugs directly into the backplane. The edge connector

is for diagnostics at the factory and is not used.

Figure 7-13

Dual arbiter

or turbo arbiter

Chassis

interface

OL-5008-03 B0

Maintenance Procedures for the Cisco 7513, Cisco 7513-MX, and Cisco 7576

Cisco 7500 Series Chassis Interface

Chassis interface

Location of the CI with Maintenance Cover Removed (Cisco 7513 and Cisco 7513-MX

Shown)

Standoff

screw holes

Cisco 7500 Series Installation and Configuration Guide

Figure

7-13.) On the

7-15