Cisco 7513 Series Mantener - Página 15

Navegue en línea o descargue pdf Mantener para Hardware de red Cisco 7513 Series. Cisco 7513 Series 20 páginas. Chassis replacement
También para Cisco 7513 Series: Manual de inicio rápido (44 páginas), Manual de instrucciones de sustitución (26 páginas), Ficha de datos (11 páginas), Manual (30 páginas), Manual de instrucciones de sustitución (19 páginas), Manual de instrucciones de sustitución (22 páginas)

Chapter 7

Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router

Figure 7-12

Standoff

screw holes

The CI is a printed circuit board mounted to the noninterface processor side of the backplane, behind the

backplane maintenance cover. The Cisco 7513 and Cisco 7513-MX have one dual arbiter and one chassis

interface. The Cisco 7576 has two dual arbiters and two chassis interfaces. (See

back of the CI (backplane side) is a connector that plugs directly into the backplane. The edge connector

is for diagnostics at the factory and is not used.

Figure 7-13

Dual arbiter

or turbo arbiter

Chassis

interface

OL-5008-03 B0

Maintenance Procedures for the Cisco 7513, Cisco 7513-MX, and Cisco 7576

Cisco 7500 Series Chassis Interface

Chassis interface

Location of the CI with Maintenance Cover Removed (Cisco 7513 and Cisco 7513-MX

Shown)

Standoff

screw holes

Cisco 7500 Series Installation and Configuration Guide

Figure

7-13.) On the

7-15