Digitek G-Line Pro Panduan Petunjuk Instalasi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Sistem Keamanan Digitek G-Line Pro. Digitek G-Line Pro 14 halaman.

G-Line 'Pro' Alarm

System

When the remote control batteries are too weak, replace them as indicated below.

Battery

Separate the radio key halves tacking care not to damage the internal circuit.

Remove the discharged batteries and insert the new ones taking care not to invert the battery polarity.

Close the radio key halves together and make sure the remote works properly by pressing either button (radio

key LED should illuminate).

Use only CR1616 batteries. Different type batteries can seriously damage the remote control unit.

Discard used batteries properly in special dedicated containers.

2.2 – Technical Specifications

Power supply

12 Vdc

Supply voltage range

9Vdc - 15Vdc

Current absorption @ 12 Vdc

<1.5ma (System armed and LED flashing)

Current absorption in 'Sleep Mode'

< 1 µA

Realay Capacity

8amp

Siren sound level

118 dB max @1m

14/14

www.digitek-moto.com

Rev05/KM/271113/DigProInst