Digitek G-Line Pro Installation Instructions Manual - Page 14
Browse online or download pdf Installation Instructions Manual for Security System Digitek G-Line Pro. Digitek G-Line Pro 14 pages.
Print PageG-Line 'Pro' Alarm
System
When the remote control batteries are too weak, replace them as indicated below.
Battery
Separate the radio key halves tacking care not to damage the internal circuit.
Remove the discharged batteries and insert the new ones taking care not to invert the battery polarity.
Close the radio key halves together and make sure the remote works properly by pressing either button (radio
key LED should illuminate).
!
Use only CR1616 batteries. Different type batteries can seriously damage the remote control unit.
Discard used batteries properly in special dedicated containers.
2.2 – Technical Specifications
Power supply
12 Vdc
Supply voltage range
9Vdc - 15Vdc
Current absorption @ 12 Vdc
<1.5ma (System armed and LED flashing)
Current absorption in 'Sleep Mode'
< 1 µA
Realay Capacity
8amp
Siren sound level
118 dB max @1m
14/14
www.digitek-moto.com
Rev05/KM/271113/DigProInst