Cisco Aironet 1140 Series Panduan Memulai - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Perangkat Keras Jaringan Cisco Aironet 1140 Series. Cisco Aironet 1140 Series 31 halaman. Autonomous access point
Juga untuk Cisco Aironet 1140 Series: Panduan Memulai (35 halaman), Panduan Konfigurasi (40 halaman), Lembar data (6 halaman), Panduan Memulai (37 halaman)

Cisco Aironet 1140 Series Panduan Memulai
22/09/2019
Setting
System Name
Con guration Server Protocol DHCP
IP Address
IP Subnet Mask
Default Gateway
Role in Radio Network
Web Server
SNMP Community
Optimize Radio Network for
Aironet Extensions
Note You can restore the access point to its factory defaults by unplugging the power jack and
plugging it back in while holding the Mode button down until the Ethernet LED turns amber
(approximately 2 to 3 seconds).

Enabling the Radio Interfaces

The access point radios are disabled by default, and there is no default SSID. You must create an
SSID and enable the radios before the access point allows wireless associations from other
devices. Refer to the
the SSID.
Follow these steps to enable the radio interfaces:
Step 1 Browse to your access point.
Step 2 When the Summary Status page appears, click 802.11N
page appears.
Step 3 Choose the Settings tab at the top of the page. The Radio Settings page appears.
Step 4 Click Enable in the Enable Radio eld.
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html
Getting Started Guide: Cisco Aironet 1140 Series Autonomous Access Point - Cisco
Default
ap
Assigned by DHCP
Note The access point does not have a default IP address.
Assigned by DHCP
Assigned by DHCP
Access point
Standard (HTTP)
default Community
Throughput
Enable
"Con guring Basic Security Settings" section
for instructions on con guring
2.4GHz
. The 2.4-GHz radio status
12/30