Cisco Aironet 1250 Series Manual - Halaman 32

Jelajahi secara online atau unduh pdf Manual untuk Perangkat Keras Jaringan Cisco Aironet 1250 Series. Cisco Aironet 1250 Series 37 halaman. Aironet 1250 series
Juga untuk Cisco Aironet 1250 Series: Panduan Konfigurasi (40 halaman), Lembar data (14 halaman), Panduan Pemasangan Perangkat Keras (10 halaman)

Halaman Cetak

1. Configuring the Access Point

Step 4

Continue holding the MODE button until the Ethernet LED turns

amber (approximately 2 to 3 seconds), then release the button.

Step 5

After the access point reboots, you must reconfigure it using the

web browser interface, the Telnet interface, or connecting to the

access point console port.

Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access

point settings to factory defaults using the web browser interface:

Step 1

Open your Internet browser. You must use Microsoft Explorer

(version 5.x or later) or Netscape Navigator (version 4.x or later).

Step 2

Enter the access point IP address in the browser address line, and

press Enter. An Enter Network Password window appears.

Step 3

Enter your username in the User Name field.

Step 4

Enter your password in the Password field and press Enter. The

Summary Status page appears.

Step 5

Click System Software. The System Software page appears.

Step 6

Click System Configuration. The System Configuration page

appears.

78-17831-01