Cisco Aironet 1250 Series 매뉴얼 - 페이지 32

{카테고리_이름} Cisco Aironet 1250 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1250 Series 37 페이지. Aironet 1250 series
Cisco Aironet 1250 Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (40 페이지), 데이터시트 (14 페이지), 하드웨어 설치 매뉴얼 (10 페이지)

페이지 인쇄

1. Configuring the Access Point

Step 4

Continue holding the MODE button until the Ethernet LED turns

amber (approximately 2 to 3 seconds), then release the button.

Step 5

After the access point reboots, you must reconfigure it using the

web browser interface, the Telnet interface, or connecting to the

access point console port.

Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access

point settings to factory defaults using the web browser interface:

Step 1

Open your Internet browser. You must use Microsoft Explorer

(version 5.x or later) or Netscape Navigator (version 4.x or later).

Step 2

Enter the access point IP address in the browser address line, and

press Enter. An Enter Network Password window appears.

Step 3

Enter your username in the User Name field.

Step 4

Enter your password in the Password field and press Enter. The

Summary Status page appears.

Step 5

Click System Software. The System Software page appears.

Step 6

Click System Configuration. The System Configuration page

appears.

78-17831-01