Cisco Aironet 1430 Series Panduan Memulai - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Perangkat Keras Jaringan Cisco Aironet 1430 Series. Cisco Aironet 1430 Series 48 halaman. Wireless bridge

Halaman Cetak

The U-bolts supplied with the bridge support mast diameters up to 1.75 in. (44.5 mm). For

Note

larger masts, you must supply the U-bolts to attach the bridge.

Bridge LEDs

When you power up the bridge for the first time, it starts in a special installation mode. The LEDs

indicate the startup status, operating mode, association status, and received signal strength. This

information simplifies the process of activating the link and positioning the antenna from the bridge

mounting location.

The LEDs are mounted on the back of the housing near the connectors (see Figure 5).

Figure 5

LED and Connector Locations

Status LED—bridge software status

Uplink LED—Ethernet status

THIRD FCC DRAFT (CISCO CONFIDENTIAL)

Radio LED—status of 802.11a radio

Install LED—