Cisco Aironet 1430 Series 시작하기 매뉴얼 - 페이지 18

{카테고리_이름} Cisco Aironet 1430 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1430 Series 48 페이지. Wireless bridge

The U-bolts supplied with the bridge support mast diameters up to 1.75 in. (44.5 mm). For

Note

larger masts, you must supply the U-bolts to attach the bridge.

Bridge LEDs

When you power up the bridge for the first time, it starts in a special installation mode. The LEDs

indicate the startup status, operating mode, association status, and received signal strength. This

information simplifies the process of activating the link and positioning the antenna from the bridge

mounting location.

The LEDs are mounted on the back of the housing near the connectors (see Figure 5).

Figure 5

LED and Connector Locations

Status LED—bridge software status

Uplink LED—Ethernet status

THIRD FCC DRAFT (CISCO CONFIDENTIAL)

Radio LED—status of 802.11a radio

Install LED—