Sony RCD-W2000ES - Cd/cdr Recorder Panduan Petunjuk Pengoperasian - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony RCD-W2000ES - Cd/cdr Recorder. Sony RCD-W2000ES - Cd/cdr Recorder 44 halaman. Limited warranty (es products)
Juga untuk Sony RCD-W2000ES - Cd/cdr Recorder: Garansi Terbatas (1 halaman)

Sony RCD-W2000ES - Cd/cdr Recorder Panduan Petunjuk Pengoperasian
Fading In and Out
recording (Rec Fader) Z
You can gradually increase the recording level
at the beginning of a recording (fade-in
recording) or decrease the recording level at the
end of a recording (fade-out recording).
This function is convenient when you do not
want the track to start or end abruptly.
Before using the remote, set DECK A/DECK B
to DECK B.
DECK A/DECK B
Notes
• Fading lasts for 5 seconds.
• You cannot change the digital optical or coaxial
output level even if you make fade-in/fade-out
recording.
• You cannot make fade-in/fade-out recording while
Synchro-Recording.
Fade-in recording
During recording pause, press REC FADER at
the point where you want to start fade-in
recording.
"Fade In" flashes in the display, and recording
starts.
Fade-out recording
During recording, press REC FADER at the
point where you want to start fade-out
recording.
" Fade Out" flashes in the display, and the unit
fades out and changes to recording pause.
30
Finalizing completes the recording of a disc. It
enables you to play the disc on DECK A of this
unit or other players. (The CD-RW compatible
player for CD-RW playback.) When a
recording is finished, a CD-R or CD-RW must
be finalized. Once that is done, a CD-R cannot
be added or erased to. CD-RWs are locked
once they are finalized, and must be unfinalized
to permit additional recording or erasure.
When using the remote, set DECK A/DECK B
to DECK B.

REC FADER

1
2
Finalizing a CD-R or CD-
RW
DECK A/DECK B
FINALIZE
Place a CD-R or CD-RW that has not
been finalized in DECK B.
Make sure that "TOC" appears in the
display. If a finalized CD is loaded, "TOC"
does not appear.
Press FINALIZE while the unit is
stopped.
Finalizing enters standby mode.
YES
FINALIZE
N
YES
H