Sony RCD-W2000ES - Cd/cdr Recorder 사용 설명서 - 페이지 30
{카테고리_이름} Sony RCD-W2000ES - Cd/cdr Recorder에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony RCD-W2000ES - Cd/cdr Recorder 44 페이지. Limited warranty (es products)
Sony RCD-W2000ES - Cd/cdr Recorder에 대해서도 마찬가지입니다: 제한 보증 (1 페이지)
페이지 인쇄
Fading In and Out
recording (Rec Fader) Z
You can gradually increase the recording level
at the beginning of a recording (fade-in
recording) or decrease the recording level at the
end of a recording (fade-out recording).
This function is convenient when you do not
want the track to start or end abruptly.
Before using the remote, set DECK A/DECK B
to DECK B.
DECK A/DECK B
Notes
• Fading lasts for 5 seconds.
• You cannot change the digital optical or coaxial
output level even if you make fade-in/fade-out
recording.
• You cannot make fade-in/fade-out recording while
Synchro-Recording.
Fade-in recording
During recording pause, press REC FADER at
the point where you want to start fade-in
recording.
"Fade In" flashes in the display, and recording
starts.
Fade-out recording
During recording, press REC FADER at the
point where you want to start fade-out
recording.
" Fade Out" flashes in the display, and the unit
fades out and changes to recording pause.
30
Finalizing completes the recording of a disc. It
enables you to play the disc on DECK A of this
unit or other players. (The CD-RW compatible
player for CD-RW playback.) When a
recording is finished, a CD-R or CD-RW must
be finalized. Once that is done, a CD-R cannot
be added or erased to. CD-RWs are locked
once they are finalized, and must be unfinalized
to permit additional recording or erasure.
When using the remote, set DECK A/DECK B
to DECK B.
REC FADER
1
2
Finalizing a CD-R or CD-
RW
DECK A/DECK B
FINALIZE
Place a CD-R or CD-RW that has not
been finalized in DECK B.
Make sure that "TOC" appears in the
display. If a finalized CD is loaded, "TOC"
does not appear.
Press FINALIZE while the unit is
stopped.
Finalizing enters standby mode.
YES
FINALIZE
N
YES
H