Sony SEN-231CD Panduan Petunjuk Pengoperasian - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony SEN-231CD. Sony SEN-231CD 24 halaman.

Playing in a Desired Order — Program Play

You can make a program by designating up to 32 steps in

the order you want them to be played: The unit will play the

disc according to your program. This function is very

convenient for recording on the cassette tape.

2 Place a disc with the label side up.

To play more than one disc, press DISC SKIP to

turn the disc tray and place up to 5 discs.

After placing discs, press & tto close the disc tray.

3 Press PROGRAM so that "PROGRAM" appears

on the display.

Choose the disc.

———_

Disc —

If you program a whole disc, see "To program a

whole disc' on page 18.

5 Press <i or >> repeatedly until the desired

selection is located.

| bt

Total program time

Current selection

6 Press PROGRAM after the desired selection has

been chosen.

3. 28)

The selection is stored, and the blinking number in

the window light up.

7 To program additional selections from the same

disc, repeat steps 5 and 6.

To program additional selections from another

disc, repeat steps 4, 5 and 6.

¢ You can make a program for recording on the

both sides of the tape at one time by performing

step 1 to 7.

8 if you program the selections for side B, press 1

to insert a pause.

*B" lights up.

9 Program the selections for side B.

Repeat steps 4 to 7 (or 5 to 7).

1 0 Press > to start playback.

The selections for side A will start playback.

Note

The programmed selections are automatically canceled

when the unit enters tuner mode.