Sony SEN-231CD 사용 설명서 - 페이지 17
{카테고리_이름} Sony SEN-231CD에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SEN-231CD 24 페이지.
페이지 인쇄Playing in a Desired Order — Program Play
You can make a program by designating up to 32 steps in
the order you want them to be played: The unit will play the
disc according to your program. This function is very
convenient for recording on the cassette tape.
2 Place a disc with the label side up.
To play more than one disc, press DISC SKIP to
turn the disc tray and place up to 5 discs.
After placing discs, press & tto close the disc tray.
3 Press PROGRAM so that "PROGRAM" appears
on the display.
4
Choose the disc.
———_
Disc —
If you program a whole disc, see "To program a
whole disc' on page 18.
5 Press <i or >> repeatedly until the desired
selection is located.
Lk
| bt
Total program time
Current selection
6 Press PROGRAM after the desired selection has
been chosen.
ee
J
3. 28)
The selection is stored, and the blinking number in
the window light up.
7 To program additional selections from the same
disc, repeat steps 5 and 6.
To program additional selections from another
disc, repeat steps 4, 5 and 6.
¢ You can make a program for recording on the
both sides of the tape at one time by performing
step 1 to 7.
8 if you program the selections for side B, press 1
to insert a pause.
*B" lights up.
9 Program the selections for side B.
Repeat steps 4 to 7 (or 5 to 7).
1 0 Press > to start playback.
F
The selections for side A will start playback.
Note
The programmed selections are automatically canceled
when the unit enters tuner mode.
17