Sony SEN-231CD Panduan Petunjuk Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Sony SEN-231CD. Sony SEN-231CD 24 halaman.

Receiving Broadcasts

3 Keep pressing TUNING - or + for about 3

seconds.

DUALMODETUNING

For a higher

| frequency.

For a lower

frequency.

When a station is received automatic tuning stops.

4 Repeat step 3 until the desired station is

received.

Indicators in the display window

¢ "TUNED" appears when a station is tuned in.

¢ "STEREO" appears when an FM stereo program of

sufficient signal strength is received.

To change the AM tuning interval

The AM tuning interval is preset at the factory to 10 kHz to

match the frequency allocation system of your country. To

change the interval to 9 kHz, proceed as follows.

1 Press the SYSTEM POWER switch to turn on the unit.

2 Set the BAND selector to AM.

3 Disconnect the AC plug from the AC outlet to turn off

the unit.

4 While pressing the *+" TUNING

button, connect the AC

plug to the AC outlet again and then turn on the unit.

To reset the interval to 10 kHz, follow the same procedure.

Note

When the interval is changed, all stored stations will be

erased from the memory. After changing the interval, be

sure to store the stations again.

1 Press TUNER.

[woes | we | co [Ren ror]

The CD player is automatically turned off in the

TUNER mode.

2 Press BAND to select FM or AM.

3 Press TUNING - or + to select the station.

DUALMODE TUNING

1 For a higher

frequency. |

) frequency.