ページを印刷するReceiving Broadcasts
3 Keep pressing TUNING - or + for about 3
seconds.
-
DUALMODETUNING
+
For a higher
|
| frequency.
For a lower
frequency.
When a station is received automatic tuning stops.
4 Repeat step 3 until the desired station is
received.
Indicators in the display window
¢ "TUNED" appears when a station is tuned in.
¢ "STEREO" appears when an FM stereo program of
sufficient signal strength is received.
To change the AM tuning interval
The AM tuning interval is preset at the factory to 10 kHz to
match the frequency allocation system of your country. To
change the interval to 9 kHz, proceed as follows.
1 Press the SYSTEM POWER switch to turn on the unit.
2 Set the BAND selector to AM.
3 Disconnect the AC plug from the AC outlet to turn off
the unit.
4 While pressing the *+" TUNING
button, connect the AC
plug to the AC outlet again and then turn on the unit.
To reset the interval to 10 kHz, follow the same procedure.
Note
When the interval is changed, all stored stations will be
erased from the memory. After changing the interval, be
sure to store the stations again.
1 Press TUNER.
[woes | we | co [Ren ror]
The CD player is automatically turned off in the
TUNER mode.
2 Press BAND to select FM or AM.
3 Press TUNING - or + to select the station.
-
DUALMODE TUNING
+
1 For a higher
frequency. |
) frequency.