Cisco ASR 9000 Series Mengkonfigurasi Pengaturan Jaringan - Halaman 21
Jelajahi secara online atau unduh pdf Mengkonfigurasi Pengaturan Jaringan untuk Perangkat Keras Jaringan Cisco ASR 9000 Series. Cisco ASR 9000 Series 26 halaman. Line card
Juga untuk Cisco ASR 9000 Series: Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (50 halaman), Manual (24 halaman), Mengkonfigurasi (46 halaman), Manual (44 halaman), Panduan Referensi Cepat (7 halaman)
Halaman Cetak
Configuring the Satellite Network Virtualization (nV) System on the Cisco ASR 9000 Series Router
SAT101/FT0/*
SAT102/FT0/*
Reloading the Satellite Device
In order to reload the satellite device, use the hw-module satellite satellite id/all reload command.
Example
RP/0/RSP0/CPU0:sat-host# hw-module satellite 101 reload
Reload operation completed successfully.
RP/0/RSP0/CPU0:May
removed
Port Level Parameters Configured on a Satellite
These are the port-level parameters that can be configured on a satellite nV system:
•
•
•
•
•
•
•
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide
OL-26061-03
host
Hotspot0
host
Hotspot0
3 20:26:51.883 : invmgr[254]: %PLATFORM-INV-6-OIROUT : OIR: Node 101
Admin state (shut and no shut)
Ethernet MTU
Ethernet link auto-negotiation that includes,
–
Half and full duplex
–
Link speed
–
Flow control
Static configuration of auto-negotiation parameters such as speed, duplex, and flow control
Carrier delay
Layer-1 packet loopback which includes,
Line loopback
–
Internal loopback
–
All satellite access port features on Cisco ASR 9000 Series Router.
Upgrading and Managing Satellite nV Software
56.0
53.0
HC-727