Digitimer D400-4 Panduan Operator - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Perekaman Digitimer D400-4. Digitimer D400-4 20 halaman. Multi-channel 50/60hz mains noise eliminator, two/four channel

Digitimer D400-4 Panduan Operator
Digitimer Ltd – D400 Operator's Manual

D400 Control Panel Software

The D400 is a standalone device and does not need any software, however, our Control
Panel replicates the three physical front panel buttons on the D400 and also provides the
following additional features:-
 Individual control of the Clear, Hold and Bypass functions for each channel.
 Ability to toggle the input signal on and off, allowing the noise template to be
visualised in isolation from the signal of interest.

Software Installation

The D400 Control Panel software is available from the
intended for use and is compatible with 32bit or 64bit Microsoft Windows 10 operating
systems. Compatibility with earlier versions of Windows is not guaranteed.
1. Download the software installer and if necessary copy the file to a USB stick and
insert into a USB port on the host PC.
2. Browse to the D400 Control Panel software installation file.
3. Double-click on the installation file and follow the installation instructions.
4. Following installation, a D400 shortcut will be placed on the Windows desktop.
5. Connect the D400 to the host PC using supplied USB cable and power it on.
6. Double-click on the D400 desktop shortcut to run the D400 Control Panel Software.

Software GUI Controls

Master Channel
Label
Clear
Hold
Bypass
Input/Template
Controls
Digitimer
website. The software is
17
Version 1.2
D400
Serial Number
Channel 1 Label