Digitimer D400-4 운영자 매뉴얼 - 페이지 17

{카테고리_이름} Digitimer D400-4에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitimer D400-4 20 페이지. Multi-channel 50/60hz mains noise eliminator, two/four channel

페이지 인쇄

Digitimer Ltd – D400 Operator's Manual

D400 Control Panel Software

The D400 is a standalone device and does not need any software, however, our Control

Panel replicates the three physical front panel buttons on the D400 and also provides the

following additional features:-

 Individual control of the Clear, Hold and Bypass functions for each channel.

 Ability to toggle the input signal on and off, allowing the noise template to be

visualised in isolation from the signal of interest.

Software Installation

The D400 Control Panel software is available from the

intended for use and is compatible with 32bit or 64bit Microsoft Windows 10 operating

systems. Compatibility with earlier versions of Windows is not guaranteed.

1. Download the software installer and if necessary copy the file to a USB stick and

insert into a USB port on the host PC.

2. Browse to the D400 Control Panel software installation file.

3. Double-click on the installation file and follow the installation instructions.

4. Following installation, a D400 shortcut will be placed on the Windows desktop.

5. Connect the D400 to the host PC using supplied USB cable and power it on.

6. Double-click on the D400 desktop shortcut to run the D400 Control Panel Software.

Software GUI Controls

Master Channel

Label

Clear

Hold

Bypass

Input/Template

Controls

Digitimer

website. The software is

Version 1.2

D400

Serial Number

Channel 1 Label