Cisco ASR 9000 Series Manual - Halaman 37
Jelajahi secara online atau unduh pdf Manual untuk Perangkat Keras Jaringan Cisco ASR 9000 Series. Cisco ASR 9000 Series 44 halaman. Line card
Juga untuk Cisco ASR 9000 Series: Mengkonfigurasi Pengaturan Jaringan (26 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (50 halaman), Manual (24 halaman), Mengkonfigurasi (46 halaman), Panduan Referensi Cepat (7 halaman)
Halaman Cetak
- 1. Field Replaceable Units
- 2. Online Insertion and Removal
- 3. Powering off the Router
- 4. Replacing the Chassis Air Filter
- 5. Required Tools and Equipment
- 6. Removing a Fan Tray
- 7. Installing a Fan Tray
- 8. Disconnecting AC Power
- 9. Reconnecting AC Power
- 10. Disconnecting DC Power
- 11. Reconnecting DC Power
Replacing Cisco ASR 9000 Series Router Components
central-services 0/RSP1/CPU0
dsc
dlrsc
Step 4
Perform redundancy switchover from active RSP4-S (slot 1) to standby RSP880-LT (slot 0).
Example:
Router# redundancy switchover
Proceed with switchover 0/RSP1/CPU0 -> 0/RSP0/CPU0? [confirm] y
Initiating switch-over.
RP/0/RSP0/CPU0:Jun 17 11:18:55.098 PST: rmf_svr[418]: %HA-REDCON-4-FAILOVER_REQUESTED :
failover has been requested by operator, waiting to initiate
RP/0/RSP1/CPU0:Jun 17 11:18:55.098 PST: nvram[74]: %MEDIA-NVRAM-6-UNMOUNT : nvram unmount
requested due to process restart or card reload
Connection closed by foreign host.
. . .
RP/0/RSP0/CPU0:Jun 17 11:26:55.098 PST: rmf_svr[418]: %HA-REDCON-1-BACKUP_READY : backup
process groups between 0/RSP0/CPU0 and 0/RSP1/CPU0 are ready
RP/0/RSP1/CPU0:Jun 17 11:26:55.098 PST: rmf_svr[420]: %HA-REDCON-6-STBY_BACKUP_READY : This
card is standby and its backup process groups are ready
. . .
The RSP880-LT in slot 0 becomes the active RSP.
Step 5
Remove the RSPS-4 from slot 1 and insert the RSP880-LT. Follow the procedure in
Cards from the Chassis, on page
After booting, the RSP880-LT is slot 1 becomes the standby RSP.
Step 6
Enter the show redundancy and show platform commands to confirm the RSPs have synchronized and are
in the correct state.
Example:
Router# show redundancy
Redundancy information for node 0/RSP0/CPU0:
==========================================
Node 0/RSP0/CPU0 is in ACTIVE role
Node Redundancy Partner (0/RSP1/CPU0) is in STANDBY role
Standby node in 0/RSP1/CPU0 is ready
Standby node in 0/RSP1/CPU0 is NSR-not-configured
Node 0/RSP0/CPU0 is in process group PRIMARY role
Process Redundancy Partner (0/RSP1/CPU0) is in BACKUP role
Backup node in 0/RSP1/CPU0 is ready
Backup node in 0/RSP1/CPU0 is NSR-ready
Group
---------
dsc
dlrsc
central-services 0/RSP0/CPU0
v4-routing
netmgmt
mcast-routing
v6-routing
Router# show platform
Node
-----------------------------------------------------------------------------
0/RSP0/CPU0
0/RSP1/CPU0
0/RSP0/CPU0
0/RSP1/CPU0
0/RSP0/CPU0
0/RSP1/CPU0
0/RSP0/CPU0
25.
Primary
Backup
---------
---------
0/RSP0/CPU0
0/RSP1/CPU0
0/RSP0/CPU0
0/RSP1/CPU0
0/RSP1/CPU0
0/RSP0/CPU0
0/RSP1/CPU0
0/RSP0/CPU0
0/RSP1/CPU0
0/RSP0/CPU0
0/RSP1/CPU0
0/RSP0/CPU0
0/RSP1/CPU0
Type
A9K-RSP880-LT-TR(Active)
A9K-RSP880-LT-TR(Standby) IOS XR RUN
Migrating from RSP4-S to RSP880-LT Card (ASR 9906 Router)
Ready
Ready
Ready
Status
---------
Ready
Ready
Ready
Ready
Ready
Ready
Ready
State
Config State
IOS XR RUN
PWR,NSHUT,MON
PWR,NSHUT,MON
Replacing Cisco ASR 9000 Series Router Components
Removing and Replacing
37