Cisco ATA 191 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Jaringan Cisco ATA 191. Cisco ATA 191 10 halaman. Analog telephone adapter
Juga untuk Cisco ATA 191: Panduan Pengguna (30 halaman), Panduan Administrasi (4 halaman), Memulai (8 halaman), Manual (10 halaman), Panduan Memulai Cepat (13 halaman), Setup Manual (6 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (30 halaman)

Your ATA

If connecting a fax machine, connect it directly to the ATA. Do not connect an extension to a fax machine,

and do not use a splitter.

Step 3

(Optional) If you have a second analog device, connect the phone cable to the PHONE 2 port on the ATA

and to your second analog device.

Step 4

Connect the ATA power cable to the DC 5V POWER port on the ATA, and plug the power cable into your

power source.

Phone Adapter Configuration Utility

You can configure or customize some phone features with the Phone Adapter Configuration Utility webpage.

Your administrator gives you the page URL, your user ID, and password.

In the Configuration Utility page, you can view some network and administration settings, as well as some

basic information about your ATA, such as firmware version, serial number, and memory use.

Most people use the Phone Adapter Configuration Utility page to set up a few basic features such as Speed

dial or Call forward. To set up these features, refer to the following table.

Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware

Phone Adapter Configuration Utility