Cisco Catalyst 2960-XR Panduan Pemasangan Perangkat Keras - Halaman 29
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Perangkat Keras Jaringan Cisco Catalyst 2960-XR. Cisco Catalyst 2960-XR 34 halaman.
Juga untuk Cisco Catalyst 2960-XR: Panduan Memulai (25 halaman), Manual Perangkat Keras (20 halaman)
Halaman Cetak
Switch Installation
Procedure
Step 1
Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface.
Step 2
Find the send (TX) and receive (RX) markings on the module top.
On some SFP or SFP+ modules, the send and receive (TX and RX) markings might be replaced by arrows
that show the direction of the connection.
Step 3
If the module has a bale-clasp latch, move it to the open, unlocked position.
Step 4
Align the module in front of the slot opening, and push until you feel the connector snap into place.
Step 5
If the module has a bale-clasp latch, close it.
Step 6
For fiber-optic SFP or SFP+ modules, remove the dust plugs and save.
Step 7
Connect the SFP cables.
Figure 24: Installing an SFP Module
Removing an SFP Module
Connecting to SFP and SFP+ Modules
Related Topics
SFP and SFP+ Module Slots
Connecting to Fiber-Optic SFP and SFP+ Modules
Class 1 laser product. Statement 1008
Warning
OL-28309-02
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
Removing an SFP Module
29